Ion Source Power Supply IS40E-PS
Description
The IS40E-PS power supply allows fine adjustment of the primary beam energy and ion density and of beam profile via adjustment of extractor, focus lens, deflection and positioning elements. Up to 4 parameters can be varied simultaneously via the 4 digital encoders. The current status of each parameter is displayed on the large front panel LCD display. All settings can be stored and recalled automatically after unit switch on, or else manually adjusted. The unit also features a built in timer and automatic standby mode. The IS40E-PS can be supplied as a full width 19” rack unit (3U height) or
free standing.
The unit is also fully software controlled and web-enabled so that it can be operated over any network, including the internet.
Only one communication interface can be chosen at time of order (please refer to table) but this can be easily changed in the future via simple rear panel plugin connection modules, without ever having to access the internals of the unit.
Application
The IS40E-PS power supply drives the IS40E1 Scanning Ion Source whose primary use is for depth profiling in AES/XPS and SIMS applications.
Software
Full dedicated software application or library module.
Technical data
Supply voltage | 110V or 230V, 50/60Hz specify at order |
Beam energy (E) | 0,00keV - 5KeV, resolution 0,01keV, ripple < 0,2Vpp |
Electron ionization current (Ie) | 0,01mA - 10mA, resolution 0,01mA |
Focus lens (F1, F2) | 0 - 5000V, resolution 1V, ripple < 0,2Vpp |
Extractor voltage (Ex) | 60 - 99,9% of energy, resolution 0,1%, ripple < 0,2 Vpp |
Beam position (Px, Py) | -5mm to 5mm, resolution 0,01mm |
Scanning area (Dx, Dy) | 10 x 10mm depends on beam position, resolution 0,01mm |
Scanning speed (time/dot) | 20μs - 30ms |
Timer | 2 modes timer, 0s - 9,99h |
User Interface | Large LCD graphics display. Functions keys and digital encoder |
Comunication Interface* (option) | RS232/485/422, USB, EtherNet/IP, Bluetooth |
Dimensions [mm] | 483 x 133 x 495 (W x H x D), 19" rack mountable or stand alone |
Weight, approx | 17 kg |
* Only one comms interface can be used at any one time and is chosen at time of order. However, this may be swapped/interchanged with any other comms interface at any future date via simple rear panel plug and play swap, without having to access the internals of the unit.